Nikon COOLPIX S60 User Manual page 190

Step
4
Insert a Memory Card
Data are stored in either the camera's internal memory
(approximately 20 MB) or a memory card.
• If recording data to the camera's internal memory, proceed to
Step 5.
4.1
Confirm that the power-on lamp and the monitor are off.
Do not turn the camera on.
4.2
Open the battery-chamber/memory card slot cover as
shown in Step 3.1 on the previous page and slide the
memory card in until it clicks into place. The camera
and memory card may be damaged if the memory
card is inserted in the wrong way. After inserting the
memory card, close the battery-chamber/memory
card slot cover as shown in Step 3.3 on the previous
page.
To remove memory cards, turn the camera
off and
confirm that the power-on
lamp and the monitor are off. Open the battery-chamber/memory card slot cover
and press the card in to partially eject the card. The card can then be removed by
hand .
. . Pages 20-21
of the
User's Manual
Step
5 Turn On the Camera
Press the power switch to turn on the
camera. The power-on lamp (green)
will be lit for a moment and the
monitor will turn on.
~
~
..
ij
ONlOF"':'~~~ (~
i
Auto Power Off in Shooting Mode (Standby Mode)
If no operations are performed for about a minute (default setting), the monitor will turn off
automatically and the camera will enter standby mode. If no operations are performed for
another three minutes, the camera will turn off automatically (the auto off function).
If the monitor is off in standby mode, press the power switch or the shutter-release button to
reactivate it.
First Steps