HAMPTON BAY MILL VALLEY 143-002-4SEC-NF Use And Care Manual page 6

Assembly (continued)
3
Attaching the right loveseat to the curved corner section
□
Attach the right loveseat (B) to the corner section (C2) at the back with one washer (DD), one bolt (AA) using wrench (II).
Attach the right loveseat (B) to the corner section (C2) at the seat with four washers (DD), two bolts (CC) and two nuts (GG)
using wrenches (II & JJ). Do not fully tighten bolts until the end of step 4.
□ Attach the front panel (C3) to the right loveseat (B) with four washers (DD), two bolts (AA) and two nuts (GG) using wrenches (II,JJ).
□ Please note that the round tube (1) of the corner section (C3) should stay on the top while the rectangular tube (2) at the bottom.
H H
GG
DD
2 (C3)
B
4
Attaching the left loveseat to the curved corner section
□
Attach the left loveseat (A) to the corner section (C1) at the back with one washer (DD), one bolt (AA) using wrench (II).
Attach the left loveseat (A) to coner section (C1) at the seat with four washers (DD), two bolts (CC) and two nuts (GG) using wrenches (II & JJ).
□ Attach the front panel (C3) to the left loveseat (A) with four washers (DD) , two bolts (AA) and two nuts (GG) using wrenches (II, JJ).
□
Completely tighten all bolts (AA & CC) and cover them with bolt caps (FF).
DD
DD
AA
1 (C3)
FF
2 (C3)
DD
AA
1 (C3)
FF
HH
GG
FF
A
C2
C1
Cover all nuts (GG) with nut caps (HH).
DD
AA
FF
C1
A
6
CC DD DD GG
FF
CC DD DD GG
C3
B
DD
A A
HH