Hans Grohe Aktiva A'8 28547 Series Installation Instructions Manual page 4

User Instructions
face ring
Turn the face ring until the name of the desired
function is next to the indexing mark.
This handshower is protected by the Quiclean™
cleaning system. When the spray mode is
changed, the Quiclean™ pins clear any scale
deposits from the normal spray channels.
The silicon spray nozzles may be cleaned of scale
deposits by turning the water on lightly and rub-
bing across them with a finger or a sponge.
If scale deposits are noticed on the spray face, pour
about 1/2" of a commercial limescale remover, such
as Lime-Away™ or CLR™ into a shallow dish.
Soak just the gray spray face for the amount of time
shown in the label instructions.
Rinse the showerhead well with clear water.
Connect the handshower to the hose. Turn the
water on and allow the handshower to flush for at
least one minute.
4