Advertisement
W
EEKLY TIMER OPERATION
• A maximum of 4 ON or OFF timers can be set for individual days of the week.
• A maximum of 28 ON or OFF timers can be set for a week.
E.g. : Runs at 24°C from waking up to leaving home, and runs at 27°C from
getting home to going to bed on weekdays.
Runs at 27°C from waking up late to going bed early on weekends.
Setting1
Setting2
Mon
ON
OFF
24°C
Fri
6:00
8:30
Setting1
Sat
ON
Sun
8:00
N ot e :
The simple ON/OFF timer setting is available while the weekly timer is on. In
this case, the ON/OFF timer has priority over the weekly timer; the weekly timer
operation will start again after the simple ON/OFF timer is complete.
Setting the weekly timer
* Make sure that the current time and day are set correctly.
1
to enter the weekly timer setting mode.
Press
2
Press
and
to select setting day and number
Pressing
selects the day of
the week to be set.
* All days can be selected.
Setting3
Setting4
ON
OFF
27°C
17:30
22:00
Setting2
OFF
27°C
21:00
blinks.
*
.
E.g. : [Mon Tue ... Sun]
and [1] are selected.
Pressing
selects
the setting number.
3
Press
,
, and
temperature.
Pressing
selects
ON/OFF timer.
Pressing
adjusts the time.
Pressing
deletes
timer setting.
* Hold down the button to change the time quickly.
Press
and
to continue setting the timer for
other days and/or numbers.
4
to complete and transmit the weekly timer
Press
setting.
N ot e :
to transmit the setting information of weekly timer to the indoor
• Press
unit. Point the remote controller toward the indoor unit for 3 seconds.
• When setting the timer for more than one day of the week or one number,
does not have to be pressed per each setting. Press
after all the settings are complete. All the weekly timer settings will be saved.
to enter the weekly timer setting mode, and press and hold
• Press
for 5 seconds to erase all weekly timer settings. Point the remote
controller toward the indoor unit.
5
to turn the weekly timer ON. (
Press
* When the weekly timer is ON, the day of the week whose timer setting
is complete, will light.
again to turn the weekly timer OFF. (
Press
goes out.)
N ot e :
The saved settings will not be cleared when the weekly timer is turned OFF.
Checking weekly timer setting
1
to enter the weekly timer setting mode.
Press
blinks.
*
2
Press
or
to view the setting of the particular
day or number.
to exit the weekly timer setting.
Press
N ot e :
When all days of the week are selected to view the settings and a different set-
ting is included among them,
to set ON/OFF, time, and
E.g. : [ON], [6:00]
and [24°C] are
selected.
Pressing
adjusts the tem-
perature.
which was blink-
*
ing goes out, and the
current time will be
displayed.
once
lights.)
will be displayed.
En-10
Advertisement
