Advertisement
● OPERATING INSTRUCTIONS ●
E
CONO COOL OPERATION
Swing airflow (change of airflow) makes you feel cooler than station-
ary airflow.
The set temperature and the airflow direction are automatically changed
by the microprocessor. It is possible to perform cooling operation with
keeping comfort. As a result energy can be saved.
1
Press
during COOL mode
ECONO COOL operation.
The unit performs swing operation vertically in various cycles according to the
temperature airflow.
Press
again to cancel ECONO COOL operation.
• ECONO COOL operation is also cancelled when the VANE, LONG, or
POWERFUL button is pressed.
T
IMER OPERATION (ON/OFF TIMER)
1
Press
or
during operation to set the timer.
(ON timer) : The unit turns ON at the set time.
(OFF timer) : The unit turns OFF at the set time.
*
or
blinks.
* Make sure that the current time and day are set correctly.
2
(forward) and
Press
time of timer.
Each press changes the set time 10 minutes forward/backward.
• Set the timer while
or
Press
or
again to cancel timer.
N ot e :
• ON and OFF timers can be set together. mark indicates the order of timer
operations.
• If power failure occurs while ON/OFF timer is set, see
START FUNCTION".
En-9
page 6
to start
Page 5
(backward) to set the
is blinking.
page 9
"AUTO RE-
E
MERGENCY OPERATION
When the remote controller cannot be used...
Emergency operation can be activated by pressing the emergency operation
switch (E.O.SW) on the indoor unit.
Each time the E.O.SW is pressed, the operation changes in
the following order:
Operation indicator lamp
Emergency COOL
Stop
N ot e :
• The first 30 minutes of operation is test run. Temperature control does not
work, and fan speed is set to High.
A
UTO RESTART FUNCTION
If a power failure occurs or the main power is turned off during operation, "AUTO
RESTART FUNCTION" automatically starts operation in the same mode as the
one set with the remote controller just before the shutoff of the main power.
When timer is set, timer setting is cancelled and the unit starts operation when
power is resumed.
If you do not want to use this function, please consult the service repre-
sentative because the setting of the unit needs to be changed.
Set temperature : 24°C
Fan speed : Medium
Horizontal vane : Auto
Advertisement
