Jacobsen ZA5 Series Safety, Operation And Maintenance Manual page 77

7.9.8 FORE / AFT ADJUSTMENT (OPTION) _______________________________________
The fore/aft adjustment is released by lifting the locking lever.
• The locking lever must latch into the desired position. It should not be
possible to move the driver seat into another position when it is
locked.
7.9.9 MULTIFUNCTION ARMREST (OPTION) _____________________________________
After releasing the hand wheel (arrow), the operator can adjust the armrest
vertical and longitudinal direction; the armrest inclination can be adjusted as
well.
The vertical and longitudinal adjustment are effected at the same time in
perceptible steps.
• After adjustment has been terminated, tighten the hand-wheel safely
7.9.10 MAINTENANCE ___________________________________________________________
Dirt can impair the function of the seat, so make sure you keep your seat clean.
Upholstery can be quickly and simply removed from the seat frame for easy
cleaning, or replacement.
During cleaning the upholstery should not be soaked through.
Use a standard commercially available upholstery or plastics cleaning agent.
Test first for compatibility on a small, concealed area.
Take care with the backrest frame, it may jerk forward and cause injury.
CAUTION
ADJUSTMENTS 7
en-75