DeWalt DCD991 Original Instructions Manual page 19

BRUSHLESS CORDLESS 13 MM DRILL/DRIVER, DCD991
BRUSHLESS CORDLESS 13 MM DRILL/DRIVER/
HAMMERDRILL, DCD996
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Voltage
Type
Battery type
No load speed
1st gear
2nd gear
3rd gear
Impact rate
1st gear
2nd gear
3rd gear
Max. torque (hard/soft)
hard
soft
Chuck capacity
Maximum drilling capacity
Wood
Metal
Masonry
Weight (without battery pack)
Noise values and vibration values (triax vector sum) according to EN62841-2-1:
L (emission sound pressure
PA
level)
L (sound power level)
WA
K (uncertainty for the given
sound level)
Drilling into metal
Vibration emission value a
h,D
Uncertainty K =
Impact drilling
Vibration emission value a
h,ID
Uncertainty K =
Screwdriving
Vibration emission value a =
h
Uncertainty K =
WALT one of the
e
DCD991 DCD996
V 18
DC
2/11
Li-Ion
Drill, Driver/Hammer
min -1 0–450 0–450/500
0–1300 0–1300/1500
0–2000 0–2000/2250
min -1 – 0–8600
– 0–25500
– 0–38250
Nm 95
Nm 66
mm 1.5–13 1.5–13
mm 55
15
–
kg 1.5
dB(A) 74
dB(A) 85
dB(A) 5
= m/s 2 <2.5
m/s 2 1.5
= m/s 2 –
2
m/s –
2
m/s <2.5
2
m/s 1.5
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN62841 and may be used to compare one tool with
another. It may be used for a preliminary assessment of exposure.

WARNING: The declared vibration and/or noise emission level
represents the main applications of the tool. However, if the tool is
used for different applications, with different accessories or is poorly
maintained, the vibration and/or noise emission may differ. This may
18
significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration and/or noise should
2/11
also take into account the times when the tool is switched off or when it
Li-Ion
is running but not actually doing the job. This may significantly reduce
the exposure level over the total working period.
Identify additional safety measures to protect the operator from
the effects of vibration and/or noise such as: maintain the tool
and the accessories, keep the hands warm (relevant for vibration),
organisation of work patterns.
EC‑Declaration of Conformity
Machinery Directive
95
Drill/Driver/Impact Drill
66
DCD991, DCD996
D WALT declares that these products described under
e
Technical Data are in compliance with:
55
2006/42/EC, EN 62841-1:2015+A11:2022,
EN 62841-2-1:2018+A11:2019+A1:2022+A12:2022.
15
These products also comply with Directive 2014/30/EU and
13
2011/65/EU. For more information, please contact D
1.6
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
96
107
3
Markus Rompel
Vice-President Engineering, PTE-Europe
D WALT, Richard-Klinger-Straße 11,
e
2.5
65510, Idstein, Germany
15.11.2021
1.5
13.0
1.5
<2.5
1.5
EnGLIsH
WALT at
e
WALT.
e
19