Xerox Phaser 6115MFP Setup Manual page 8

Step 2: Installing the Product Drivers
Windows Network Installation
Note: The scanner driver and MFP ControlCentre are not available over
a network connection.
1. Insert the Software and Documentation CD-ROM into your
computer's CD-ROM drive. The installer will start-up
automatically.
2. Ensure the Phaser 6115MFP is turned On.
3. Click the Language button and select your language from the list.
4. Select Install Drivers.
5. Select Network Printer.
6. Click Agree after reading and accepting the Xerox License
Agreement.
7. Select your Phaser 6115MFP Multifunction Product from the list
of discovered printers, and then click the Install button.
8. If your printer was not in the list type the IP address from the
configuration page into the Enter Printer's IP Address text box.
9. Print a Test Page to verify the installation was successful.
Phaser® 6115MFP Multifunction Product
Step 2: Installing the Product Drivers
EN - 6