Usb Connection - Xerox Phaser 6115MFP Setup Manual

USB Connection

A local USB connection requires a standard USB printer cable. This
cable is not included with your printer and must be purchased
separately.
Note: You cannot access CentreWare IS or Scan to Email over a USB
connection.
Connecting via USB:
1. Ensure the product is plugged in, but turned Off.
2. Connect the larger end of the USB cable to the computer.
3. Connect the smaller end of the USB cable to the product.
4. Turn the Phaser 6115MFP On.
5. Install the drivers, go to:
■
Windows USB Installation on page 7.
■
Macintosh USB Installation on page 9.
Phaser® 6115MFP Multifunction Product
EN - 3
USB Connection