Xerox Phaser 6115MFP Setup Manual page 7

Print a Configuration Page
When installing your printer over a network, print a Configuration Page.
The Configuration Page lists the TCP/IP address, you will need this
information when installing the printer driver.
1. On the control panel, press the Display button.
2. Scroll to Configuration Page, and then press the
Menu/Select button to print.
Connecting via Ethernet
1. Connect one end of the Ethernet cable to the computer.
2. Connect one end of the Ethernet cable to the router or hub.
3. Turn the product On.
4. Install the drivers, go to:
■
Windows Network Installation on page 6.
■
Macintosh Network Installation on page 8.
Phaser® 6115MFP Multifunction Product
EN - 5
Network Connection