Inventini PASCAL HOCKER User Manual page 7

LIGHTS
Fig. 3
The switch and the charging socket
PASCAL HOCKER ASSEMBLY INSTRUCTIONS
1. The ligthing switch is located inside the hole at the bottom
of the base (Fig. 3).
2. The charging socket is located by the lighting switch.
3. Always remember to turn the product o prior to transportation.
1. The product lighting time is up to 8 hours of continuous operation
depending on the ambient temperature and the degree of charge.
2. Products with internal lighting are equipped with accumulators.
Charging takes place using the charger included with the kit.
3. The charging time up to 100% is about 10 hours.
1. Do not exceed the 8 hour usage period without charging the product.
2. The batteries should be charged even when the product is stored.
Electrical / electronic products are not domestic waste!
Dispose of the product after its use in accordance with applicable law.
Remove all inserted batteries / accumulators and dispose of them
correctly, separately from the product.
The consumer is legally obliged (in accordance with the relevant
regulations regarding batteries) to return all used batteries and
accumulators; disposal along with household waste is prohibited.
Batteries and accumulators containing harmful substances
are marked with this symbol. This means that they can not
be disposed of with household waste.
Used batteries / accumulators can be transferred to local waste
disposal sites, producer's branches or wherever batteries / accumulators
are sold.
By following the above recommendations, you meet all relevant legal
requirements and contribute to environmental protection.
CONTROL PANEL
LIGHTING ANG CHARGING
USE AND BATTERY LIFE
UTILIZATION
DE
7