Inventini PASCAL HOCKER User Manual page 6

INSTRUCTIONS
Inflate setup
REPAIR
6
Deflate setup
Fig. 1
Fig. 2
1. Choose a flat even spot where you want to pitch the hocker.
2. Unzip the bag and unpack the hocker.
3. Make sure the pump valve is in the INFLATE SETUP (Fig. 1).
4. Use the pump to inflate the product until you feel it is completely
taut (Fig. 2).
1. Set up the pump valve in the DEFLATE SETUP (Fig. 1)
2. Pack the product into the transport bag.
A small hole can be repaired by using repair kit - glue and foil.
If the product foil is damaged:
1. Locate the damage.
2. Degrease the surface.
3. Apply the adhesive to the hole, taking care that the adhesive does
not get inside the product.
4. Apply the foil patch.
5. Wait 60 minutes for the adhesive to fully bond.
There is a possibility of sending the product back to the manufacturer.
We o er paid service for mechanical damage.
ASSEMBLY
DISASSEMBLY
DAMAGE
www.inventini.com