LG MULTI F Installation Manual page 7

F
MULTI
F
MULTI MAX
Operation
DANGER
or submerged.
Use a dedicated breaker for this product.
Do not operate the disconnect switch with wet hands.
Periodically verify the equipment mounts have not
deteriorated.
If the base collapses, the unit could fall and cause physical injury or
death.
Do not allow water, dirt, or animals to enter the unit.
Do not operate the unit with the panel(s) or protective
moving parts.
The rotating, hot, cold, and high-voltage parts of the unit can cause
physical injury or death.
CAUTION
To avoid physical injury, use caution when cleaning or servicing the air conditioner.
There is risk of electric shock, physical injury or death.
no metal scraps, screws, or bits of wiring have been left
inside or surrounding the unit.
Do not use the product for mission critical or special pur-
pose applications such as preserving foods, works of art, or
other precision air conditioning applications. The equipment
is designed to provide comfort cooling and heating.
of the unit, or damage its parts.
Do not block the inlet or outlet.
Unit will malfunction.
Do not allow water, dirt, or animals to enter the unit.
There is risk of unit failure.
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG" is a registered trademark of LG Corp.
SAFETY INSTRUCTIONS
Use inert (nitrogen) gas when performing leak tests or air
purges.
ble gases.
death.
If refrigerant leaks out, ventilate the area before operating the
unit.
If the unit is mounted in an enclosed, low-lying, or poorly ventilated area,
shock, explosion, physical injury or death.
Do not touch the refrigerant piping during or after
operation.
It can cause burns or frostbite.
Do not open the inlet during operation.
There is risk of electric shock, physical injury or death.
Do not open the inlet during operation.
There is risk of unit failure.
Do not operate the unit when the panel(s) or protective
cover(s) are removed.
Non-secured covers can result in product malfunction due to dust or
water in the service panel.
Periodically verify the equipment mounts have not
deteriorated.
If the base collapses, the unit could fall and cause property damage or
product failure.
Use a only soft cloth to clean the air conditioner.
use wax, thinner, or strong detergents.
Strong cleaning products will damage the surface of the air conditioner,
or will cause its appearance to deteriorate.
-
Do not
7