LG MULTI F Installation Manual page 192

SAFETY INSTRUCTIONS
Operation, continued
Note:
Clean up the site after installation is finished, and check
that no metal scraps, screws, or bits of wiring have been left
inside or surrounding the unit.
Do not use this equipment in mission critical or special-
purpose applications such as preserving foods, works of art,
wine coolers or refrigeration. This equipment is designed to
provide comfort cooling and heating.
Oil, steam, sulfuric smoke, etc., can significantly reduce the
performance of the unit, or damage its parts.
Do not block the inlet or outlet.
Unit may malfunction.
Do not open the inlet during operation.
There is risk of unit failure.
Provide power to outdoor unit to warm the compressor
crankcase at least six (6) hours before operation begins.
Starting operation with a cold compressor sump(s) may result in severe
bearing damage to the compressor(s). Keep the power switch on during
the operational season.
8
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG" is a registered trademark of LG Corp.
Periodically verify the hanging bolts and other hardware
securing the unit have not deteriorated.
If the unit falls from its installed location, it can cause property damage
or product failure.
Do not operate the unit with the panel(s) or protective
cover(s) removed; keep fingers and clothing away from
moving parts.
Non-secured covers can result in malfunction due to dust or water in the
service panel.
Do not allow water, dirt, or animals to enter the unit.
There is risk of unit failure.
Use a only soft cloth to clean the air conditioner.
use wax, thinner, or strong detergents.
Strong cleaning products may damage the surface of the air conditioner,
or may cause its appearance to deteriorate.
F
MULTI
F
MULTI MAX
Do not