Function; Dip S/W Setting - LG MULTI F Installation Manual

Function

Dip S/W Setting

If you set the Dip Switch when power is on, the change in setting is not applicable. The changing set-
ting is enabled only when Power is reset.
Dip Switch
1 2 3 4
Normal Operation (No Function)
Forced Cooling Operation
Wiring Error Check
Saving Power Consumption (Step 1)
Saving Power Consumption (Step 2)
Mode Lock (Cooling)
Mode Lock (Heating)
Night Quiet Mode (Step 1)
Night Quiet Mode (Step 2)
Mode Lock (Cooling) + Night Quiet Mode (Step 1)
Mode Lock (Cooling) + Night Quiet Mode (Step 2)
Mode Lock (Cooling) + Saving Power Consumption (Step 1)
Mode Lock (Cooling) + Saving Power Consumption (Step 2)
Mode Lock (Heating) + Saving Power Consumption (Step 1)
Mode Lock (Heating) + Saving Power Consumption (Step 2)
WARNING: When you set the dip switch, you should turn off the circuit
breaker or shut the power source of the product down.
CAUTION
• Unless the applicable dip switch is set properly, the product may not
work.
• If you want to set a specific function, request that the installer sets the
dip switch appropriately during installation.
Function
Function
Installation Manual 47