Xerox MajestiK 5760 Reference Manual page 22

USAGE GUIDELINES
18
7 Store unused material in sealed packages to avoid humidity
related feeding and image quality problems.
Hints, Tips & Testing Results
Xerox testing has shown the following:
•
When the recommended Xerox material is run as detailed
above, feeding performance will be good, but should not be
expected to equal 24 lb LX performance.
•
The recommended non-Xerox materials will provide good
results, but may experience more variation in feeding
performance and image quality than the Xerox brand.
•
To avoid problems (jams & poor image quality) caused by both
dry and humid environments, store the Xerox material in its
resealable bag with desiccant pack. Other brands should also
be stored in resealed packages when not in use.
•
Multi-sheet feeding has been observed with some non-Xerox
brands, usually occuring at the bottom of the stack. It may be
necessary to feed single sheets to overcome this problem.
•
Toner saturation on electronic originals should be limited to a
total of 280% (70% for each Color). Higher toner saturations
can result in poorly fused prints.
•
For each brand, follow the manufacturer's specific
recommendations for transferring and washing.
•
The phone numbers to order the non-Xerox materials are:
Air Waves Elite: 800-468-7335
Magic Touch Mirror Image SS 500: 800-624-4210
Paropy CL - Joto: 800-565-5686
•
A 50/50 blend of polyester/cotton provides better image
durability than shirts made of 100% cotton. Tight weave fabrics
(heavy T-shirts) provide better results than loose knit fabrics
(sweat shirts).
MAJESTIK 5760/5765 MATERIALS USAGE GUIDE