Applications; Duplex Copies - Xerox MajestiK 5760 Reference Manual

Applications

Duplex Copies

MAJESTIK 5760/5765 MATERIALS USAGE GUIDE
The sections that follow provide specific techniques which should be
used for certain types of jobs in order to assure optimum feeding
performance and image quality.
Application Description & Expectations
Duplex (two-sided) copying refers to imaging on the second side of
a copy already made on the 5760/5765 copier/printer. When using
the recommended 24 to 28 lb bond papers, feeding performance
and image quality will be good, but may not equal the performance
and quality of side 1.
Recommended Materials
Xerox 24 lb Image Series LX , 8.5 x 11" = 3R3874
Xerox 24 lb Image Series LX , 11 x 17" = 3R3877
Xerox 28 lb 4024 DP , 8.5 x 11" = 3R2353
Xerox 28 lb 4024 DP , 11 x 17" = 3R3873
Hammermill 28 lb Color Copy Paper , 8.5 x 11" = 10246-7
1 2 3. . .
Steps for Success
1 Run the side that has the least image area (or the black and white
side) first.
2 Load the paper for side 1 in the Paper Tray Bypass. Do not load
more than 25 sheets of paper.
3 Load the side 1 imaged copies/prints into the Paper Tray Bypass
with the imaged side down. The paper should be rotated 180 or
90 degrees from the side 1 position. (Example: Run the side 1
lead edge as the side 2 trail edge, or feed side 1 long-edge feed,
then side 2 short-edge feed. The document on the Document
Glass should also be rotated 90 degrees in the latter case.)
4 Run side 2 within 15 to 20 minutes of running side 1.
5 When running large jobs of more than 25 copies, split the job into
multiple groups of 25 sheets maximum. That is, run 25 copies of
side 1, then run 25 copies of side 2.
6 Heavy-weight papers (greater than 28 lb bond (105 gsm), coated
papers, and transparencies should not be used for two-sided
copying. Frequent jams and image quality problems are likely
with heavy-weight and coated papers. Duplexing of
transparencies will cause damage to the copier/printer.
APPLICATIONS
23