Folding & Unfolding Miter Saw Stand - Grizzly T33296 Owner's Manual

Folding & Unfolding
Miter Saw Stand
This miter stand has two locking positions: Folded
for stowage or unfolded for saw operations. When
the stand is unfolded for use, for maximum stability
and load bearing safety, saw must be locked at the
operation location shown in Figure 19.
Operation
Location
Stop Bolt
Figure 19. Saw operation location.
Before folding the miter stand for stowage, move
the miter saw to the saw stow location (as far away
from the wheels as possible) or until one rail con-
tacts the stop bolt, as shown in Figure 20. This
weight distribution gives better leverage when the
stand is being folded and unfolded. In this position
the stand is not as top heavy when carted on its
wheels in its vertical folded position.
Figure 20. Saw stow location.
-14-
Saw
Saw
Stow
Location
Rail Against
Stop Bolt
Folding Miter Stand
Lock saw in stow location (see Figure 20).
1.
Hold handle bars firmly and place right foot
2.
on foot bar, as shown in Figure 21.
Unload saw weight by lifting handle bars, roll
3.
right foot forward, and press toe against foot
pedal to unlock elevation lock latch.
Keep foot firmly on foot bar and lift upward on
4.
handle bars the rest of the way until stand is
heard locking in vertical folded position.
Handle Bar
Foot Pedal
Figure 21. User control positions.
Unfolding Miter Stand
Position hands and foot, as shown in Figure
1.
21, pull down on handle bars, unloading saw
weight, then roll right foot forward pressing
toe against foot pedal to unlock stow latch.
Keep foot firmly on foot bar and lower handle
2.
bars until stand is heard locking in unfolded
position.
Move and lock saw in operation location, as
3.
shown in Figure 19.
Model T33296 (Mfd. Since 07/23)
Foot Bar