Page 1
PISTOLA PULVERIZADORA / PISTOLA A SPRUZZO PER VERNICIARE PFS 100 C2 PISTOLA PULVERIZADORA PISTOLA A SPRUZZO PER VERNICIARE Instrucciones de utilización y de seguridad Indicazioni per l’uso e per la sicurezza Traducción del manual de instrucciones original Traduzione delle istruzioni d’uso originali...
Table of contents Introduction Proper use ............................Page 36 Features and equipment ........................Page 36 Included items .............................Page 36 Technical data .............................Page 36 General safety advice for electrical power tools 1. Workplace safety ...........................Page 37 2. Electrical safety ..........................Page 37 3. Personal safety ..........................Page 37 4.
Introduction Paint spray gun PFS 100 C2 Included items 1 Paint spray gun PFS 100 C2 Introduction 2 Nozzles* 1 x 0.6 mm, 1 x 0.8 mm 2 Suction pressure valves* We congratulate you on the purchase of your new 1 Cleaning nozzle device.
Introduction / General safety advice for electrical power tools b) Avoid touching earthed surfaces such the intervening periods of time when the device is as pipes, radiators, ovens and refrig- switched off or is running but is not actually in use. erators with any part of your body.
General safety advice for electrical power tools tool is switched off before you connect the device if he or she is not familiar it to the mains, pick it up or carry it. with it or has not read the instructions and advice.
Q 1. Thoroughly mix the unthinned sprayed medium and bring it to average room temperature The Parkside paint spray gun PFS 100 C2 can be (20–22 °C). used to apply sprayed media with a viscosity up to Do not increase the temperature to change the 80 DIN-sec.
Advice on use / Bringing into use / Maintenance and cleaning * This device cannot be used to spray media contain- set when no drops are formed and the gun ing discrete particles / solids. The abrasive effect produces a fine, consistent spray pattern. of these media shortens pump and valve life.
Maintenance and cleaning / Service centre / Warranty / Disposal 5. Never use inflammable solvents to clean the The warranty covers only claims for material and device. maufacturing defects, but not for transport damage, 6. Use a dry cloth to clean the housing. Never for wearing parts or for damage to fragile compo- use petrol, solvents or cleaning agents that nents, e.g.
EN 50580:2012 EN 55014-1: 2006+A1+A2 EN 55014-2:1997+A1+A2 EN 61000-3-2: 2006+A1+A2 EN 61000-3-3: 2008 Type / Device description: Paint spray gun PFS 100 C2 Date of manufacture (DOM): 02–2014 Serial number: IAN 97735 Bochum, 28.02.2014 Semi Uguzlu - Quality Manager - We reserve the right to make technical modifications in the course of product development.
Need help?
Do you have a question about the PFS 100 C2 and is the answer not in the manual?
Questions and answers