Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Milab LSR-3000
Summary of Contents for Milab LSR-3000
- Page 1 Milab LSR-3000 Quick Guide Manual...
- Page 2 Thank You for Choosing a Milab Microphone! With a history that goes back to the 1930s, Milab is one of the oldest, continuously operating microphone manufacturers in the world. Every one of our microphones is handcrafted in our plant in southern Sweden.
- Page 3 Connection The LSR-3000 can be connected to any mic input, mixer/amplifi er, or mic preamp using a standard microphone cable (XLR). The microphone is designed for phantom powering at 48 V (P48, IEC 1938) with positive voltage on the audio lines versus the cable shield.
- Page 4 • The LSR-3000 should be aimed with the top grill towards the sound source. See polar diagram. • The LSR-3000 can be used as a handheld device or together with a stand adapter (enclosed). When holding the microhone, do not cover any part of the grill with your hand since this may distort the sound.
- Page 5 Under no circumstances and under no legal theory, tort, contract, or otherwise, shall Milab Microphones be held liable to you or any other person for any indirect, special, incidental, or consequential damages of any kind, including, without limitation, damages for loss of goodwill, work stoppage, computer or equipment failure or malfunction, or any and all other commercial damages or losses.
- Page 6 Specifi cations Product name: Milab LSR-3000 Type: Condenser Article number: 1131 (black); 1132 (nickel) Frequency response: 20 to 20,000 Hz Filter: 80 Hz HPF (switchable) Pre-attenuation pad: -12 dB (switchable) Max SPL 138 dB (1 % THD at 1 kHz)
Need help?
Do you have a question about the LSR-3000 and is the answer not in the manual?
Questions and answers