Page 3
Table of Contents 2. The following items will be included in the delivery: Welcome 1 pcs of Milab VM-44 Link including Included in the delivery • XLR-Amplifier with individually plotted VM-44 Link Cond. Microphone frequency curve Guidelines 1 pcs of stand holder Connection •...
Page 4
5. Connection The VM-44 can be connected to any mic Art No: 1300), otherwise a RC network has input, mixer/amplifier, or mic preamp using to be incorporated to block the 48 Vdc.
Page 5
9. VM-44 Link Head holder How to mount the included microphone stand holder, and not loose the built in shock absorber function: 1. Be sure that the holder is pressed between the two rubber rings.
Page 6
10. Declaration of Conformity CE Milab Microphones AB, declares as it´s sole responsibility that the above named product is in compliance with the EMC Directive 89/336/EEC, 92/31/EOF and conform to the requirements of the Harmonized Products Standards EN 55013, EN 55020, IEC 803-1.
Page 7
Under no circumstances and under no legal theory, tort, contract, or otherwise, shall Milab Microphones be held liable to you or any other person for any indirect, special, incidental, or consequential damages of any kind, including, without limitation, damages for loss of goodwill, work stoppage, computer or equipment failure or malfunction, or any and all other commercial damages or losses.
Page 8
Pop shield Windscreen Omni capsule art.no: 3500 art.no: 3406 art.no: 1145 Phantom Power Miniature Table Mahogany case Supply Stand art.no: 1004 art.no: 1300 art.no: 3344...
Need help?
Do you have a question about the VM-44 and is the answer not in the manual?
Questions and answers