Table of Contents
Advertisement
Web UI
The Web UI designed for the HT-EUROPA4-2 allows for basic controls and device settings. This Web UI
can be accessed through a modern browser, e.g., Chrome, Safari, Firefox, IE10+, etc.
To get access the Web UI:
Connect the LAN port of the switcher to a local area network. Ensure there's a DHCP server in the
1.
network so that the device can obtain a valid IP address. If there is no DHCP server the following
two methods can be used to locate the IP address:
Connect the RS-232 port of the matrix and send the API command "GET IPPADR<CR><LF>".
a
(See "HT-EUROPA4-2_API Commands" document for a complete list of available API
commands)
Use the third-part tool "SmartSetGUI" to search the IP address. Double click the icon tool to
b
launch the application and click "Search" to get the IP address. (To find the device make
sure your PC's network settings are also set to Auto or DHCP mode.)
Connect the PC to the same network as the matrix switcher.
2.
Input the matrix switcher's IP address in the browser and press Enter, the following window pops
3.
up.
Hall Technologies
August 7, 2023
Page 9 of 18
Advertisement
Table of Contents
