4k 4x4 hdmi matrix switch, supports 4k uhd resolution hdcp 2.2 and 1.4 compliant with edid management rs-232, ip, ir and front panel control with status lcd display analog and digital extracted audio outputs (18 pages)
Summary of Contents for Hall Technologies HT-EUROPA4-2
Page 1
Hall Technologies • 1234 Lakeshore Dr Suite #150 Coppell, TX 75019 • halltechav.com HT-EUROPA4-2 4x2 Matrix Switcher USER MANUAL August 7, 2023 Hall Technologies August 7, 2023 Page 1 of 18...
Introduction OVERVIEW The HT-EUROPA4-2 is a simple HDMI matrix switcher with four HDMI inputs and two HDMI outputs. It allows up to four Ultra HD/4K sources to be independently routed to two Ultra HD/4K displays. It supports digital optical audio de-embedding from two outputs and analog audio de-embedding from Output 1.
ARC: SPDIF OUT outputs the ARC audio from the TV connected to HDMI OUT 2 RS-232 Connect to a control PC or control system for RS-232 serial control ETHERNET Connect to an ethernet device for LAN control Hall Technologies August 7, 2023 Page 4 of 18...
Note: Before installation, please ensure the device is disconnected from the power source. 1. Attach the installation bracket to the enclosure using the screws provided. 2. Attach the brackets to the desired mounting surface using hardware provided by others. Hall Technologies August 7, 2023 Page 5 of 18...
IR control: the included IR remote is for controlling the matrix c. Ethernet control: connect the RJ-45 port to a local area network 5. Connect the DC 5V power supply provided 6. Power on all attached devices Hall Technologies August 7, 2023 Page 6 of 18...
Code Switch on the bottom corner of the remote. In this case you will also need to redefine the IR system code in the matrix using the API command. (See the API Commands document.) Hall Technologies August 7, 2023 Page 7 of 18...
PC are configured correctly. RS-232 DEFAULT SETTING Parameters Value Baud Rate 115200 bps Data Bits 8 bits Parity None Stop Bits 1 bit Flow Control None Hall Technologies August 7, 2023 Page 8 of 18...
Web UI The Web UI designed for the HT-EUROPA4-2 allows for basic controls and device settings. This Web UI can be accessed through a modern browser, e.g., Chrome, Safari, Firefox, IE10+, etc. To get access the Web UI: Connect the LAN port of the switcher to a local area network. Ensure there’s a DHCP server in the network so that the device can obtain a valid IP address.
Page 10
The Web UI main page includes two main tabs: General and System. • General (1 page) – provides video switching controls, audio mutes, CEC, and EDID setting changes • System – provides IP settings, changing login password, and doing firmware updates Hall Technologies August 7, 2023 Page 10 of 18...
Description HDMI Output Clicking this mutes the audio out of the HDMI output Clicking this mutes the de-embedded audio out of the line out (output 1 only) and SPDIF Audio De-embed Hall Technologies August 7, 2023 Page 11 of 18...
Otherwise, it will copy HDMI OUT 1. NOTE: The EDID processing priority is OUT 1 > OUT 2. Last configuration will be invoked when power is restored. Setting EDID takes effect immediately. Hall Technologies August 7, 2023 Page 12 of 18...
Click to apply setting changes. Note: After the IP settings are changed, please refresh the Apply Web UI page to re-login. LOGIN UI Element Description Login To change the password, enter the current password and then the new password. Apply Click to apply setting changes. Hall Technologies August 7, 2023 Page 13 of 18...
SYSTEM UI Element Description Click button to reset the device to factory default settings. A pop-up will open asking to Factory Reset confirm factory reset. Reboot Click to reboot the device. Hall Technologies August 7, 2023 Page 14 of 18...
1. Open up the web UI and press the “Factory Reset” button (see Web UI section) 2. Send the RESET command through the RS-232 port 3. Hold OUTPUT1 and OUTPUT2 buttons simultaneously for 5 seconds. All front panel LEDs will flash once factory reset is initiated. Hall Technologies August 7, 2023 Page 15 of 18...
Confirm same steps with HDMI OUTPUT as noted above but with Audio No Audio on SPDIF on De-embed mute not enabled OUPTUT2 Confirm dip switch is in the correct De-embedded position and not ARC Hall Technologies August 7, 2023 Page 16 of 18...