Table of Contents
Advertisement
UI Element
Manual
Auto
Delay (1~30min)
EDID
UI Element
EDID
Hall Technologies
August 7, 2023
Description
When Auto CEC is set to OFF, clicking the manual control buttons will power on/off the
display manually.
Click to enable or disable CEC Auto Control. With Auto enabled, CEC commands will
automatically be sent to the connected display to turn the display on/off. Default setting is
Auto CEC ON.
Click to select the desired delay time to power off the display automatically when no signal
is present. (CEC Auto must be set to ON).
Description
Sets the desired EDID for each of the inputs. The default EDID setting is "Restore Defaults".
In this mode, when the display connected to HDMI OUT 1 has a resolution less than 4k and
the HDMI OUT 2 has a display resolution of 4k, the EDID will copy from HDMI OUT 2.
Otherwise, it will copy HDMI OUT 1.
NOTE: The EDID processing priority is OUT 1 > OUT 2. Last configuration will be invoked
when power is restored. Setting EDID takes effect immediately.
Page 12 of 18
Advertisement
Table of Contents
