Xerox DocuColor 5750 Reference Manual page 8

COLOR LASER
BRIGHT WHITE LABELS
STEPS FOR SUCCESS
5750 / 5765 / 5790 / 5799
1. Load sheets in the BYPASS Tray
2. Select Label/Heavy Weight Mode.
3. Remove sheets from the output device after 50 sheets. Fan sheets to dissipate heat build-up, thus
preventing sheets from sticking together.
DocuColor 40/30 Family
1. Load only 25 sheets in the BYPASS Tray or 250 sheets in the HIGH CAPACITY FEEDER
2. Select Heavy Weight Mode.
3. Remove sheets from the output device after 50 sheets. Fan sheets to dissipate heat build-up, thus
preventing sheets from sticking together.
DocuColor 12/ DocuCentre Color Series 50
1. Load sheets in Tray 2, 3 or 4
2. Select Heavy Weight Mode.
3. Remove sheets from the output device after 50 sheets. Fan sheets to dissipate heat build-up, thus
preventing sheets from sticking together.
DocuColor 4
1. Load only 25 sheets in the MULTI SHEET INSERTER
2. Select Label Mode.
3. Remove sheets from the output device after 50 sheets. Fan sheets to dissipate heat build-up, thus
preventing sheets from sticking together.
DocuColor 2045/60
1. Load labels in Tray 3
2. Select 151-220 gsm Mode.
3. Remove sheets from the output device after 50 sheets. Fan sheets to dissipate heat build-up, thus
preventing sheets from sticking together.
** Refer to the product specific Recommended Materials List for proper paper handling instructions.
TIPS
Fan sheets before loading.
Store unused material in plastic polybag.
When clearing a jam, carefully pull out the transfer drawer to avoid machine damage.
Insure no labels have pre-dispensed.
Limit toner saturation on electronic originals to a total of 240% saturation (60% for each color).
FREE LABEL TEMPLATES
Microsoft Word Compatible Templates
For 1 up label template, use AVERY 5165
For 30 up label template, use AVERY 5160
.
**
.
**
.
**
.
**
.
**