Advertisement
Available languages
Available languages
8. Operating functions
Diagrams
kinpumps.com
Functions
Adjusting method
After the electric pump is
installed and powered
up, press the On/Off key
and the water pump will
start running; convesely,
On / Off
the electric pump stops
running.
In the normal operating
conditions, press the
''setting'' key repeatedly
to switch back and forth
among operating data,
Running status display
and stop at the data to
be displayed; it will
switch to the display of
current pressure after
10s of no-operation.
In the normal operating
conditions, press ''+ key''
and ''- key'' to adjust
head of water pump.
Press once to adjust it by
Adjust the head
1m, or move the touch
slider left and right to
quickly adjust the head.
In the normal operating
status, long press the
screen lock key for 3
seconds, and all the
lights turn off and only
Lock/unlock screen
the screen lock light is
on. When the screen is
locked long press the
screen lock key for 3
seconds to unlock it. In
case of any fault, it will
automatically exit the
locked status and
display the fault code.
Press any key to wake
up the panel, and the
panel lights will turn off
after the current status
Wake up
is displayed for 3
seconds.
SKT 1000
Description
After electric pump runs
normally, the following
parameters can be
displayed:
Current head: H (m) Set
head: d (m)
Input power: P (W) Input
voltage: U (V) Current
speed: (r/min)
Accumulated running
days: t (d)
Software version: U-
Level display area. Two
bars are displayed for
10~15m, four bars are
displayed for 16-23m, six
bars are displayed for
24-31m, and so on. Note:
the adjustable range of
head is
10~60m, and the default
setting is 30m.
GB
11
Advertisement
