Kin SKT 1000 User Manual page 10

7. Operating Instructions
Keys
On/Off Key
Setting key
+ ey
- key
Screen lock key
Display areas
Level slider
Unit display area
Fault indicator
LED display area
kinpumps.com
Starting switch of controller; after electric pump is installed and powered
up, click the ''On/Off'' key and the water pump will start running;
conversely, the electric pump stops running.
Click the ''Setting'' key repeatedly to toggle between operating data, and
stop at the data to be displayed.
Used when setting parameters ''+'' represents ''increase''
Used when setting parameters ''-'' represents ''decrease''
Long press the ''screen lock key'' for 3 seconds to lock the screen or unlock
the screen
The head can be adjusted quickly by touching and slide the slider left and
right, there are totally eight adjustable levels, and each level is displayed
with two bars.
Display the corresponding unit of the parameter in the LED display area.
Power fault indicator, water shortage indicator, leakage fault indicator,
pressure sensor fault indicator, flowmeter fault indicator, temperature
sensor fault indicator, motor fault indicator.
Current parameters of controller are displayed when the pump works
normally
Description
Description
SKT 1000
GB
10