D - Assembly And Installation; Filter Installation; Dimensions And Layout - Lincoln Electric AMBICLEAN 5000 Safety Instruction For Use And Maintenance

D - ASSEMBLY AND INSTALLATION

FILTER INSTALLATION

Assembly:

The AMBICLEAN ESSENTIAL 5000 is a monobloc filter.

Its four nozzles can be turned to optimise air flow.

It is to be fixed along a wall, on a platform, on a stand, at a height of 4 to 5 m depending on the height of
the room.

For starting up, you must fasten the control cabinet at breast height and connect it to your electrical system
400 V - 3 Ph - 50 Hz.

DIMENSIONS AND LAYOUT

Dimensions of right inlet filter:
It is to be fixed along a wall, on a platform, on a stand, at a height of 4 to 5 m depending on the height of the room.
Then adjust the direction of the nozzles so as to have an air jet distributed evenly throughout the workshop and
allow a return flow to the AMBICLEAN.
-10
IMPORTANT: Before starting to assemble elements at a height,
make sure you comply with all the safety regulations applicable
on your site. (Use of a safety harness at heights, marking of
zones etc.)
Weight of filter: 380 Kg
8695 8472 / A
AMBICLEAN 5000