Table of Contents
Advertisement
(d) Changing the automatic shutter zone area
0 Set the
" to AREA by pushing [MENU UP], [MENU DOWN] buttons.
(D Set the measurement light area by pushing [DATA UP], [DATA DOWN] buttons.
PRESET A
PRESET B
PRESET C
PRESET D
PRESET E
USER
(e) Confirming the contents of the measurement light area selected by the automatic shutter
0 Set the
to AREA DISP by pushing [MENU UP], [MENU DOWN] buttons.
® Area screen appears by pushing [DATA UP], [DATA DOWN] buttons.
When AREA is set to USER, the setting can be changed on the area menu. When changing the area, refer
to the item "7.2 (8) Setting USER area".
® Push the [DISP] button to return to the menu.
(f) Changing the CCD storage mode
0 Set the
to FLD/FRM by pushing [MENU UP], [MENU DOWN] buttons.
(D Select either FLD (field) or FRM (frame) by pushing [DATA UP], [DATA DOWN] buttons.
(g) Changing the freeze operation setting
0 Set the
" to FREEZE INPUT by pushing [MENU UP], [MENU DOWN] buttons.
(D
Set the freeze operation by pushing [DATA UP], [DATA DOWN] buttons.
When set to FRONT
:The Freeze Operation is performed by using the FREEZE button on the front
panel.
When set to TRIG jf
L
: The Freeze Operation is performed at the rising edge of the rear TRIG input.
When set to TRIG %T" : The Freeze Operation is performed at the falling edge of the rear TRIG input.
21
Advertisement
Table of Contents
