F&F CLG-04 Quick Start Manual

CLG-04
Operating time counter
Do not dispose of this device in the trash along with other waste!
According to the Law on Waste, electro coming from households free of charge and can
give any amount to up to that end point of collec� on, as well as to store the occasion of
the purchase of new equipment (in accordance with the principle of old-for-new, regard-
less of brand). Electro thrown in the trash or abandoned in nature, pose a threat to the
environment and human health.
Purpose
The operating time counter is used to count the number of ope-
rating hours in automatic production processes or the number
of operating hours of equipment which, due to safety require-
ments and operational efficiency, has a certain residual capacity,
i.e. a service life that must not be exceeded (e.g. advanced drive
units, specialised radioactive lamps, etc.).
Functioning
The CLG-04 counter is a unidirectional electric counter with an
electronic counter, capable of counting operating hours from
0 to 999999.99 (6 hourly digits + 2 minute decimal digits).
When the maximum count is reached, the counter starts coun-
ting from 0.
Time counting takes place when a voltage of 100÷240 V AC/DC is
connected to terminals 5-6.
F&F Filipowski L.P.
Konstantynowska 79/81, 95-200 Pabianice, POLAND
phone/fax (+48 42) 215 23 83 / (+48 42) 227 09 71
www.fif.com.pl; e-mail: biuro@fif.com.pl
- 1 -