GE 22 Owner's Manual And Installation page 9

About the refrigerator doors, ge com
Refrigerator Doors
The refl_igerator (loo_ may teel different
than the ones you are used to. The
special door opening/closing teatuI'e
makes sure the (loo_ close all the way
and are securely sealed.
_Al/en opening and closing tile door you
will notice a stop position. If tile door is
opened past this stop point, the door will
remain open to allow you to load and
unload fi_od more easily; _\]/en tile door
is only partially open, it will automatically
close.
Tile resistance xou teel at tile stop
position will be reduced as tile door
is loaded with tood.
When the door is only partially open,
it will automatically close.
Beyond this stop the door will
stay open.
Door Alignment
1t dooIS are uneven,
a(!just
tile
reti_igerator (loo_:
O Using a 7/] 6" socket wrench, ttli'n
the door adjusting* screw to the Fight
to raise tile door; to tile left, to lower
it.
(A nflon
plug, imbedded in tile
threads of the pin, prevents the pin
fl'om turning unless a wrench is
used.)
0 After one or two turns of tile
wrench, open and close tile
refl_igerator door and check the
alignment at the top of the (loots.