GE 22 Owner's Manual And Installation page 7

About the shelves and bins. go corn
Not all features are on all models.
Snuggel_
Refrigerator m n
Freezer bin
Freezer tilt-out bin
Refrigerator Door Bins and Freezer Door Tilt-Out Bins
Large Bins
The larger refl_gerator door bins and
fl'eezer tilt-out door bins are ac!iustable.
To remove: i,ifi the ti'ont oI the bin straight
up, then lilt up and out.
The snugger helps prevent tipping, spilling
or sliding of small items stored on the door
shelf. Place a finger on either side of the
snugger near the rear and move it back
and forth to fit your needs.
To replace or relocate: Engage the back side .,D° notblock
o, he binmo,ded ppo
doo_: Then push down on the ti'ont of the
bin. Bin will lock in place.
SmallBms
To remove: Lift the fl'ont of the bin straight
up then out.
Toreplace: Position the bin above the
rectangular molded supports on the doo_;
Then slide the bin down onto the support
to lock it in place.
CAUTION: O n
models with an ice
chuteinsidethetop
freezer doorbib,be
carefulwhenp/ac/bg
itemsin thebin.
Makesurethat
itemsdo notblock
or fail into theice
chute.
)
Press tab and pull shelf
forward to remove
Slide-Out Spillproof Shelf
The slide-out spillproof shelf allows you
to reach items stored behind othe_s. The
special edges are designed to help prevent
spills ti'om ddpping to lower shelves.
Toremove:
Slide the shelf out until it reaches the stop,
then press down on the tab and slide the
shelf straight out.
To replace or relocate:
I,ine the shelf up Mth the supports and
slide it into place. The shelf can be
repositioned
when the door is at 90 ° or
more. To reposition the shelf, slide the shelf
past the stops and angle downward. Slide
shelf down to the desired position, line up
with the supports and slide into place.
Make sure you push the shelves all the way back
in before you dose the door.
7