Network Configuration - Canvac Q Air Q Heat Wifi 3220 Use Instructions

7

5. NETWORK CONFIGURATION

Caution
You have to forget any other local network and make sure your Android or iOS device
just connects to the wireless network you want to configure.
Make sure the wireless feature for your Android or iOS device works well and can
connect back to your original wireless network automatically.
Reminder
The user must complete all steps in 8 minutes after powering on the air conditioner,
otherwise it will need to be powered back on.
Using an Android or iOS device for network configuration
Make sure your mobile device has already been connected to the wireless network
that you want to use. You also need to forget other irrelevant wireless networks in
case these influence your configuration process.
Disconnect the AC power supply.
Connect the AC power supply, then press the "LED DISPLAY" or "DO NOT DISTURB"
button seven times in 10 seconds.
If the AC displays "AP", this means that the AC wireless is already in "AP" mode.
Note
There are two ways to complete network configuration:
Network configuration by means of a Bluetooth scan
Network configuration by adding a smart device
© 2023, Elon Group AB. Med ensamrätt.