Advertisement
UD-301/351
DISASSEMBLY FOR REPAIR
*Remove the metallic cabinet from the body befor-
ehand.
(1) Open the cassette holder by pushing the eject button.
Then remove the lid by pushing the hook @ located
inside the cassette holder by means of a square-bar
standard a screwdriver and the like.
N
Disconnect the flat cable.
Remove
the screws @, and then remove
the rear
o
panel.
Remove CN1, CN2 and the 6 screws @, and then
remove the printed circuit board.
(4)
Remove the 6 screws @, and then remove the front
panel.
(5)
Remove
the
8 screws
@,
and
then
remove
the
mechanism
main unit and the spring.
(6) Remove the 2 screws @, and then remove the
printed circuit board mounting fitting.
(7)
The
CD
mechanism
can
be removed
when
the 3
screws @ are removed.
(Note 1)
Refer to DP-MA5/MAQ for the method to disassemble the
mechanism.
(Note 2)
The FL indication goes out when the rear panel and the
cassette printed circuit board (X29-) are removed, but
the
opepration
of the
CD
can
be
checked
not-
withstanding.
22
Advertisement
