Memory Button - Sherwood RX-4010R Operating Instructions Manual

Stereo am/fm receiver

Hide thumbs Also See for RX-4010R:

Table of Contents

Available languages

10. MEMORY BUTTON

12. FM MODE BUTTON

Determines tuning mode;

14. INFRARED REMOTE

RECEIVER

This consists of an infrared filtering window and an infrared remote receiver. This receiver receives the pulse

code modulated (PCM) infrared signals transmitted by the commander and converts it into the electrical

signal to control the system. The infrared filtering window effectively filters out interfering lights to prevent

the receiver from responding to the unwanted noise and light. Do not obstruct this window with any

material.

15. FM/AM BAND SELECTOR

For selecting desired band in either FM or AM.

16. STATION PRESET BUTTONS

When these buttons are pressed, the stations stored in memory will be recalled. Press button '3' or '2' and '9'

in sequence for preset number '3' or '29'. In case of '1', '2' buttons release each button after more than

2 seconds.

Table of Contents