Basic Camera Setup - X10 VANGUARD VK77A Owner's Manual

B C S
ASIC AMERA ETUP
Your Vanguard Camera is ready to go out of the box! Follow these
steps for a quick setup of your new camera.
Unpack these items.
You should have: the camera and its power supply; the camera
remote; the camera mounting bracket, and the screws to install the
bracket. A wireless video receiver, and it's video cable and power
supply (shown above but sold separately) is also required if you want
to use the camera wirelessly.
4
Connect the camera to power.
Plug the camera's power supply into a standard wall outlet. Plug the
other end into the camera. Remove the protective cover from the
camera's lens.

Basic Camera Setup

5