01.2
SYMBOLOGY
In this manual, points of considerable importance are marked with the following symbology:
INSTRUCTION:
WARNING:
DANGER:
01.3
APPLIED STANDARDS
All JOLLY MEC products are constructed according to the following directives:
•
EU 305/2011
European construction products regulation.
Machines.
•
2006/42/CE
Electromagnetic compatibility (EMC).
•
2014/30/UE
Low voltage (LVD) - electrical safety.
•
2014/35/UE
2011/65/EU (RoHs 2) Restriction of the use of certain hazardous substances in electrical and electronic equipment
•
Radio Equipment
•
2014/53/UE
Pressure Equipment (PED)
•
2014/68/UE
And in compliance with the standards:
Electromagnetic compatibility (EMC) - Limits - Limits for harmonic current emissions (equipment input
•
CEI EN 61000-3-2
current ≤ 16 A per phase).
Electromagnetic compatibility (EMC) - Limits. Limitation of voltage changes, voltage fluctuations and flicker
•
CEI EN 61000-3-3
in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject
to conditional connection.
Electromagnetic compatibility. - Requirements for household appliances, electric tools and similar
•
EN 55014-1
apparatus - Emission
Electromagnetic compatibility – Requirements for household appliances, electric tools and similar
•
EN 55014-2
apparatus - Immunity. Product family standard.
Household and similar electrical appliances - Safety. General requirements.
•
EN 60335-1
Household and similar electrical appliances. - Safety. Particular requirements for gas, oil and solid-fuel
•
EN 60335-2-102
burning appliances having electrical connections.
Measurement methods for electromagnetic fields of household appliances and similar apparatus with
•
EN 62233
regard to human exposure.
Domestic and similar gas systems powered by the distribution mains.
•
UNI 7129
•
UNI 10412-2
Hot water heating system - Safety requirements - Specific requirements for systems with domestic type
heating devices powered by solid fuel with built-in fireplace, with total fire power not over 35 kW.
•
UNI 10683
Heat generators operating with wood or other solid bio fuels - Installation requirements.
Heating boilers - Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of
•
UNI EN 303-5
up to 500 kW - Terminology, requirements, testing and marking.
Chimneys. General requirements.
•
UNI EN 1443
Chimneys - Requirements for metal chimneys - System chimney products.
•
UNI EN 1856-1
Chimneys. Requirements for metal chimneys - Metal flue liners and connecting flue pipes.
•
UNI EN 1856-2
•
UNI EN 13229
Insert appliances including open fires fired by solid fuels. Requirements and test methods.
Roomheaters fired by solid fuel. - Requirements and test methods.
•
UNI EN 13240
Chimneys. Thermal and fluid dynamic calculation methods - Chimneys serving more than one heating
•
UNI EN 13384
appliance.
Residential space heating appliances fired by wood pellets. - Requirements and test methods.
•
UNI EN 14785
Safety of machinery - General principles for design - Risk assessment and risk reduction.
•
UNI EN ISO 12100
Instructions regarding the correct use of the appliance.
This point is particularly important.
An important point regarding behaviour for preventing injury and damage to
materials is expressed.
5