Table of Contents
Advertisement
01.2
SYMBOLOGY
In this manual, points of considerable importance are marked with the following symbology:
INSTRUCTION:
WARNING:
DANGER:
01.3
APPLIED STANDARDS
All JOLLY MEC products are constructed according to the following directives:
•
EU 305/2011
European construction products regulation.
Machines.
•
2006/42/CE
Electromagnetic compatibility (EMC).
•
2014/30/UE
Low voltage (LVD) - electrical safety.
•
2014/35/UE
2011/65/EU (RoHs 2) Restriction of the use of certain hazardous substances in electrical and electronic equipment
•
Radio Equipment
•
2014/53/EU
Pressure Equipment (PED)
•
97/23/EU
And in compliance with the standards:
Electromagnetic compatibility (EMC) - Limits - Limits for harmonic current emissions (equipment input
•
CEI EN 61000-3-2
current ≤ 16 A per phase).
Electromagnetic compatibility (EMC) - Limits. Limitation of voltage changes, voltage fluctuations and flicker
•
CEI EN 61000-3-3
in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject
to conditional connection.
Electromagnetic compatibility. - Requirements for household appliances, electric tools and similar
•
EN 55014-1
apparatus - Emission
Electromagnetic compatibility – Requirements for household appliances, electric tools and similar
•
EN 55014-2
apparatus - Immunity. Product family standard.
Safety of household electrical appliances and similar products. - General safety regulations
•
EN 60335-1
Safety of household electrical appliances and similar products. - Special regulations for appliances fitted
•
EN 60335-2-102
with gas, diesel or solid fuel burners and electrical connections.
Measurement methods for electromagnetic fields of electrical appliances for home use and similar goods
•
EN 62233
regarding human exposure.
Technical Documentation For The Assessment Of Electrical And Electronic Products With Respect To The
•
EN 50581
Restriction Of Hazardous Substance
Domestic and similar gas systems powered by the distribution mains.
•
EN 7129
Hot water heating system - Safety requirements - Specific requirements for systems with domestic type
•
UNI 10412-2
heating devices powered by solid fuel with built-in stove, with total fire power not over 35 kW.
Heat generators operating with wood or other solid bio fuels - Installation requirements
•
UNI 10683
Heating boilers. - Heating boilers for solid fuels, manually and automatically stoked, nominal
•
UNI EN 303-5
heat output of up to 500 kW - Terminology, requirements, testing and marking.
Fireplaces - General requisites
•
UNI EN 1443
Chimneys - Requirements for metal chimneys - System chimney products.
•
UNI EN 1856-1
Chimneys. Requirements for metal chimneys - Metal flue liners and connecting flue pipes.
•
UNI EN 1856-2
Insert appliances including open fires fired by solid fuels - Requirements and test methods
•
UNI EN 13229
Roomheaters fired by solid fuel - Requirements and test methods
•
UNI EN 13240
Fireplaces - Thermal calculations and dynamic fluid.
•
UNI EN 13384
Residential space heating appliances fired by wood pellets - Requirements and test methods
•
UNI EN 14785
•
UNI EN ISO 12100
Machine safety.
Instructions regarding the correct use of the appliance.
This point is particularly important.
An important point regarding behaviour for preventing injury and damage to
materials is expressed.
5
Advertisement
Table of Contents
