Connection Of Across The Arc Wire Feeders To The Maverick ® 325X - Lincoln Electric Maverick 325X Operator's Manual

MAVERICK 325X
®
CONNECTION OF ACROSS THE ARC WIRE FEEDERS
TO THE MAVERICK 325X
®
These connections instructions apply to both the LN-25X Pro,
Activ8X and CrossLinc models.
• Shut the welder off.
• For electrode Positive, connect the electrode cable to the "+"
terminal of the welder and work cable to the "-" terminal of
the welder. For electrode Negative, connect the electrode
cable to the "-" terminal of the welder and work cable to the
"+" terminal of the welder.
• Attach the single lead from the front of the feeder to work
using the spring clip at the end of the lead. This is a control
lead to supply current to the wire feeder motor; it does not
carry welding current (See Figure A.9).
• For the CrossLinc Remote, connect the remote in series with
the wire feeder and/or electrode and the weld cable of the
desired polarity (See Figure A.10).
CROSSLINC TECHNOLOGY - This machine features CrossLinc
technology, which allows for remote control of the welding output
via the weld cables rather than a control cable. As result, the
control cable is no longer needed when connected to a CrossLinc
compatible wire feeder or remote control.
CROSSLINC WIRE FEEDER SETUP EXAMPLE CR
CROSSLINC REMOTE SETUP EXAMPLE
FIGURE A.8
Description
LN-25X Wire Feeder
K126
®
350A FCAW-S Welding
Gun
Electrode Cable - 2/0, 50
ft. (15.3 m), Black
Electrode Cable - 2/0, 10
ft. (3.1 m), Black
Work Clamp
Cable Connectors - TWECO
to Lug Adaptor
FIGURE A.9
Description
CrossLinc Remote
EH-305D Electrode
Holder
Electrode Cable - 2/0, 50
ft. (15.3 m), Black
Electrode Cable - 2/0, 10
ft. (3.1 m), Black
Work Clamp
Cable Connectors - TWECO
to Lug Adaptor
A-13
Product Number QTY
K4267-2
PRO Innershield
®
K126-12
K2485-2
K2483-2
K910-1
K2487-1
Product Number QTY
K4345-1
®
K909-7
K2485-2
K2483-2
K910-1
K2487-1
INSTALLATION
1
1
2
1
1
2
1
1
2
1
1
2