Download Print this page

Mitsubishi Electric Mr.Slim MSY-GT09VF Operating Instructions Manual page 10

Advertisement

Available languages

Available languages

● OPERATING INSTRUCTIONS ●
C
LEANING
Instructions:
• Switch off the power supply or turn off the breaker before cleaning.
• Be careful not to touch the metal parts with your hands.
• Do not use benzine, thinner, polishing powder, or insecticide.
• Use only diluted neutral detergents.
• Do not expose parts to direct sunlight, heat, or fire to dry.
Front panel
Hinge
Hole
1. Lift the front panel until a "click" is heard.
2. Hold the hinges and pull to remove as shown in
the illustration above.
• Wipe with a soft dry cloth or rinse it with water.
• Do not soak it in water for more than two
hours.
• Dry it well in shade.
3. Install the front panel by following the removal
procedure in reverse. Close the front panel
securely and press the positions indicated by
the arrows.
<GT09/13/15>
Air cleaning filter
(Electrostatic anti-allergy enzyme filter, option)
Back side of air filter
Every 3 months:
• Remove dirt by a vacuum cleaner.
• Put it back to its original position, and install all tabs of the air cleaning filter.
When dirt cannot be removed by vacuum cleaning:
• Soak the filter and its frame in lukewarm water before rinsing it.
• After washing, dry it well in shade. Install all tabs of the air filter.
Every year:
• Replace it with a new air cleaning filter for best performance.
• Parts Number
GT09/13/15:
MAC-2320FT
(with frame)
MAC-2321FT
(no frame)
GT18/24:
MAC-2310FT-E
(with frame)
MAC-2410FT-E
(no frame)
<GT09/13/15>
Air filter
Pull to remove
from the air filter.
Attach to the air filter.
En-9
<GT09/13/15>
<GT18/24>
<GT18/24>
Push to install
into the unit
along the filter
Filter guide
guide.
Pull to remove from the unit.
www.ttair.co.th | Tel : 02-385-0728 | E-mail : sales@ttair.co.th | LINE ID : @ttair
• Do not use water hotter than 50°C.
• Do not use a scrubbing brush, a hard sponge, or the like.
• Do not soak or rinse the horizontal vane.
• Do not apply excessive force on the fan as it may cause cracks or breakage.
Air filter (Nano platinum filter)
Clean every 2 weeks
• Remove dirt by a vacuum cleaner, or rinse with water.
• After washing with water, dry it well in shade.
What is "Nano platinum filter" ?
Nano platinum is a ceramic particle that includes a platinum nanoparticle.
The particles are incorporated into the filter material, which results in pro-
viding semi-permanent antibacterial and deodorizing characteristics for the
filter. Nano platinum surpasses the catechin (a bioflavonoid that is found
in green tea) in performance. Nano platinum filter uses this compound not
only to improve air quality but also to eliminate bacteria and viruses. This air
filter has a semi-permanent lasting effect even after washing it with water.
<GT18/24>
Air cleaning filter
(Microparticle catching filter)
Removes the microparticles from the air by means
of static electricity.
Back side of air filter
Every 3 months:
• Remove dirt by a vacuum cleaner.
• Do not wash it with water. Replace it with a new air cleaning filter when tobacco
tar or oil stains adhere to it.
• Put it back to its original position, and install all tabs of the air cleaning filter.
Every 3 year:
• Replace it with a new air cleaning filter for best performance.
• Parts Number
GT09/13/15:
MAC-EMF515FT-E
MAC-EMF525FT-E
GT18/24:
MAC-EMF615FT-E
MAC-EMF625FT-E
Important
• Clean the filters regularly for best performance and to re-
duce power consumption.
• Dirty filters cause condensation in the air conditioner which
will contribute to the growth of fungi such as mold. It is
therefore recommended to clean air filters every 2 weeks.
(with frame)
(no frame)
(with frame)
(no frame)

Advertisement

loading