Table of Contents
Advertisement
Item
Encryption
Use 802.1x
Authentication
WPA Authentication
Mode
Pre-Shared Key
Format
Pre-Shared Key
Enable
Pre-Authentication
Authentication
RADIUS Server
Apply Changes
Reset
Description
Select the encryption supported over wireless
access. The encryption method can be None, WEP,
WPA(TKIP), WPA2 or WPA2 Mixed
Refer to 4.9 What is WEP?
4.15 What is Wi-Fi Protected Access (WPA)?
4.16 What is WPA2(AES)?
4.17 What is 802.1X Authentication?
4.18 What is Temporal Key Integrity Protocol
(TKIP)? 4.19 What is Advanced Encryption Standard
(AES)?
While Encryption is selected to be WEP.
Click the check box to enable IEEE 802.1x
authentication function.
Refer to 4.16 What is 802.1x Authentication?
While Encryption is selected to be WPA.
Click to select the WPA Authentication Mode with
Enterprise (RADIUS) or Personal (Pre-Shared Key).
Refer to 4.15 What is Wi-Fi Protected Access
(WPA)?
While Encryption is selected to be WPA.
Select the Pre-shared key format from the pull-down
menu. The format can be Passphrase or Hex (64
characters). [WPA, Personal(Pre-Shared Key)
only]
Fill in the key value. [WPA, Personal(Pre-Shared
Key) only]
Click to enable Pre-Authentication. [WPA2/WPA2
Mixed only, Enterprise only]
Set the IP address, port and login password
information of authentication RADIUS sever.
Click the Apply Changes button to complete the
new configuration setting.
Click the Reset button to abort change and recover
the previous configuration setting.
18
Advertisement
Table of Contents
