Broadcast SSID
IAPP
802.11g Protection
RF Output Power
Turbo Mode
Block Relay Between
Clients
WMM
ACK Timeout
Apply Changes
Reset
3.3.6 Wireless - Security Setup
This page allows you setup the wireless security. Turn on WEP, WPA,
WPA2 by using encryption keys could prevent any unauthorized access to
your wireless network.
Screen snapshot – Wireless Security Setup
transmission.
Refer to 4.13 What is Preamble Type?
Click to enable or disable the SSID broadcast
function.
Refer to 4.14 What is SSID Broadcast?
Click to enable or disable the IAPP function.
Refer to 4.20 What is Inter-Access Point
Protocol(IAPP)?
Protect 802.11b user.
To adjust transmission power level.
Click to Enable/Disable turbo mode.(Only apply to
WLAN IC of Realtek).
Click Enabled/Disabled to decide if blocking relay
packets between clients.
Click Enabled/Disabled to init WMM feature.
Set ACK timeout value. It shows current time in the
end.
Click the Apply Changes button to complete the
new configuration setting.
Click the Reset button to abort change and recover
the previous configuration setting.
17