Table of Contents
Advertisement
Item
Disable Wireless LAN
Interface
Band
Mode
Site Survey
SSID
Channel Number
Associated Clients
Enable Mac Clone
(Single Ethernet
Client)
Enable Universal
Repeater Mode
SSID of Extended
Interface
Apply Changes
Reset
3.3.5 Wireless - Advanced Settings
These settings are only for more technically advanced users who have a
sufficient knowledge about wireless LAN. These settings should not be
changed unless you know what effect the changes will have on your
X-Micro WLAN 11g Broadband Router.
Description
Click on to disable the wireless LAN data
transmission.
Click to select 2.4GHz(B) / 2.4GHz(G) /
2.4GHz(B+G)
Click to select the WLAN AP / Client / WDS /
AP+WDS wireless mode.
The Site Survey button provides tool to scan the
wireless network. If any Access Point or IBSS is
found, you could choose to connect it manually
when client mode is enabled. Refer to 3.3.9 Site
Survey.
It is the wireless network name. The SSID can be 32
bytes long.
Select the wireless communication channel from
pull-down menu.
Click the Show Active Clients button to open Active
Wireless Client Table that shows the MAC address,
transmit-packet, receive-packet and
transmission-rate for each associated wireless
client.
Take Laptop NIC MAC address as wireless client
MAC address. [Client Mode only]
Click to enable Universal Repeater Mode
Assign SSID when enables Universal Repeater
Mode.
Click the Apply Changes button to complete the
new configuration setting.
Click the Reset button to abort change and recover
the previous configuration setting.
15
Advertisement
Table of Contents
