Advertisement
Available languages
Available languages
essary to sharpen the blades 4 and adjust the gap be-
tween them� To do this, it is recommended to contact a
specialized CROWN service center�
Power tool storage (see fig. 10)
• After completing the work and performing the op-
erations for cleaning the power tool and blades 4, put
the protective cover 9 on the blades 4 (see fig. 10.1).
• Store the power tool in a place protected from mois-
ture and out of the reach of children� You can store
the power tool by hanging it on the wall as shown in
fig. 10.2. Use hanging hole 8 for this�
After-sales service and application service
Our after-sales service responds to your questions
concerning maintenance and repair of your product as
well as spare parts. Information about service centers,
parts diagrams and information about spare parts can
also be found under: www.crown-tools.com�
Transportation of the power tools
• Categorically not to drop any mechanical impact on
the packaging during transport.
• When unloading / loading is not allowed to use any
kind of technology that works on the principle of clamp-
ing packaging.
The manufacturer reserves the possibility to introduce changes.
Li-Ion batteries
The contained Li-Ion batteries are subject to the Danger-
ous Goods Legislation requirements� The user can trans-
port the batteries by road without further requirements�
When being transported by third parties (e�g�: air trans-
port or forwarding agency), special requirements on
packaging and labelling must be observed. For prepa-
ration of the item being shipped, consulting an expert
for hazardous material is required.
Dispatch batteries only when the housing is undam-
aged. Tape or mask off open contacts and pack up the
battery in such a manner that it cannot move around
in the packaging. Please also observe possibly more
detailed national regulations�
Environmental protection
Recycle raw materials instead of dispos-
ing as waste.
Power tool, accessories and packaging
should be sorted for environment-friendly re-
cycling�
The plastic components are labelled for categorized
recycling�
These instructions are printed on recycled paper man-
ufactured without chlorine�
English
13
Advertisement
