Table of Contents
Advertisement
en Basic settings
Basic settings
16 Basic settings
You can configure the basic settings
Basic settings
for your appliance to meet your
needs.
16.1 Overview of the basic
settings
Programme selector with programme
positions
Set the volume of the signal
2
at the end of the programme:
0 (off) to 4 (very loud)
Set the volume of the signal
3
tone emitted when the but-
tons are pressed:
0 (off) to 4 (very loud)
Activate (On) or deactivate
4
(OFF) the reminder to clean
the drum.
Display the number of fin-
5
ished programmes.
16.2 Changing the basic set-
tings
Set the programme selector to po-
1.
sition 1. → Page 34
34
Press
2.
turn the programme selector to po-
sition 2.
a The display shows the current
value.
Use the programme selector to se-
3.
lect the required basic setting.
→ Page 34
To change the value, press
4.
To save the changes, switch off
5.
1
the appliance.
2
3
Cleaning and servicing
17 Cleaning and servi-
4
5
To keep your appliance working effi-
Cleaning and servicing
ciently for a long time, it is important
to clean and maintain it carefully.
17.1 Cleaning the drum
Risk of injury!
Permanently washing at low temper-
atures and a lack of ventilation for
the appliance may damage the drum
and cause injury.
Regularly run a programme for
▶
cleaning the drum or wash at tem-
peratures of at least 60 °C.
Leave the appliance to dry after
▶
every operation with the door
open, and leave the detergent
drawer to dry.
Run the Trumrengöring (Drum
▶
Clean) programme without laun-
dry but with washing powder that
contains oxygen bleach or a a
cleaning agent for caring for the in-
side of the appliance.
→ "Accessories", Page 29
and, at the same time,
cing
CAUTION
.
Advertisement
Table of Contents
