Table of Contents
Advertisement
Before using for the first time
en
Malfunctions may occur when using filtered or
■
demineralised water.
The appliance may request that you top up the water
tank even though it may be full, or operation with
steam is cancelled after approx. two minutes.
If required, mix filtered or demineralised water with
the bottled non-carbonated mineral water with a ratio
of one to one.
Notes
If your water is very hard, we recommend that you
■
use softened water.
If you only use softened water, you can set the water
■
hardness range to "softened".
If you use mineral water, set the water hardness
■
range to "4 very hard".
If you use mineral water, you must only use non-
■
carbonated mineral water.
Water hardness range
0
1 (up to 1.3 mmol/l)
2 (1.3 - 2.5 mmol/l)
3 (2.5 - 3.8 mmol/l)
4 (above 3.8 mmol/l)
Initial use
After connecting the appliance to the power or following
a power cut, the settings for initial use are shown in the
display.
You can change these settings at any time in the
Note:
basic settings. ~ "Basic settings" on page 20
Setting the language
German is the preset language.
Use the rotary selector to select the required
1.
language.
Touch the
arrow.
Æ
2.
The next setting appears.
Setting the clock
The time starts at 12:00.
Use the rotary selector to set the current time.
1.
Touch the
arrow
Æ
2.
Setting the date
The default date is 1.1.2014.
Always touch the
Æ
1.
setting.
Use the rotary selector to set the current day, month
2.
and year.
16
Setting
0 softened
1 soft
2 medium
3 hard
4 very hard
arrow to move to the next
Setting the water hardness
The default water hardness setting is "very hard".
Change this setting if your water is softer. You can ask
your water supplier about the water hardness level.
Set the hardness using the rotary selector.
1.
Touch the
arrow.
Æ
2.
A message appears on the display confirming that
the initial use has been completed.
Cleaning the cooking compartment
To eliminate the new-appliance smell, heat up the
cooking compartment without anything in it and with the
oven door closed.
Remove the accessories from the cooking
1.
compartment.
Remove any leftover packaging, such as polystyrene
2.
pellets, from the cooking compartment.
Before heating the appliance, wipe the smooth
3.
surfaces in the cooking compartment with a soft,
damp cloth.
Press the on/off button to switch on the appliance.
4.
Fill the water tank. ~ "Filling the water tank"
5.
on page 24
Set the specified type of heating, temperature and
6.
steam injection, then start the appliance.
Settings
Type of heating
4D hot air
Temperature
Maximum
Cooking time
1 hour
Keep the kitchen ventilated while the appliance is
7.
heating.
Use the on/off button to switch off the appliance
8.
once the specified time has elapsed.
Wait for the cooking compartment to cool down.
9.
Clean the smooth surfaces with soapy water and a
10.
dish cloth.
Empty the water tank and dry the cooking
11.
compartment. ~ "After every steam operation"
on page 25
Cleaning the accessories
Clean the accessories thoroughly using soapy water
and a dish cloth or soft brush.
:
with added steam ("high")
Advertisement
Table of Contents
