Specifications; Card Motor - SMC Networks LAT3 Series Operation Manual

3. Specifications

3. 1 Card Motor

(1) Card Motor specifications
Model
Stroke [mm]
Type
Maximum
instantaneous
thrust [N]
Motor
Note 1) Note 2) Note 3)
Continuous thrust
[N]
Note 1) Note 2) Note 3)
Type
Guide
Maximum
weight [g]
Type
Resolution [μm]
Sensor
Origin
signal
Pushing
Pushing [mm/s]
operation
Set value of force
Note 1) Note 2) Note 3)
Positioning
resolution
Positioning [μm]
operation Positioning
repeatability
Note 4) Note 5)
[μm]
Accuracy [μm]
Measurement
Note 4) Note 5)
Maximum speed [mm/s] Note 6)
Operating temperature range [
Operating humidity range [%RH]
Note 7)
Weight [g]
Table weight [g]
Note 1) Continuous thrust can be generated and maintained continuously. Instantaneous maximum thrust can be generated
only momentarily. Refer to "Fig. 4-1: Thrust force characteristics" (P.9) and to "Fig. 4-3: Allowable thrust force setting
values" (P.11) for details.
Note 2) When mounted on a base with good heat dissipating capacity at 20
Note 3) The pushing force varies depending on the operating environment, pushing direction and table position. Refer to Fig.
4-1 Thrust force characteristics" (P.9).
Note 4) When the temperature of the product is 20
Note 5) The accuracy after mounting the Card Motor may vary depending on the mounting conditions, operating conditions
and environment, so please calibrate it with the equipment used in your application.
Note 6) The maximum speed varies depending on the operating conditions (load weight, total travel distance).
Note 7) The weight of the Card Motor itself. Controllers and cables are not included.
LAT3-10 LAT3F-10
10
5.2
3
load
Horizontal: 1000, Vertical: 100
30 1.25
position
None Provided
speed
1 to 5
30 1.25
±90 ±5
±100 ±10
o
C]
130
50
o
C.
LAT3-20 LAT3F-20 LAT3-30
20
Moving magnet type linear motor
6
2.8
Linear guide with circulating balls
Optical linear encoder (incremental)
30 1.25
None Provided None
6
1 to 4.8
30 1.25
±90 ±5
±100 ±10 ±100
400
5 to 40 (No condensation)
35 to 85 (No condensation)
190
70
o
C ambient temperature.
- 8 -
LAT3F-30 LAT3M-50 LAT3F-50
30
5.5
2.6
Horizontal: 1000,
Horizontal: 1000,
Vertical load not
Vertical: 50
30 1.25 5
Provided
1 to 3.9
30 1.25 5
±90 ±5 ±20
±10 ±40
250
90
50
2.5
1.5
allowed.
1.25
Provided
1 to 2
1.25
±5
±10
360
110