8-3-5. INITIAL
Re-download Software
Check the AP Reset
PM8916's KPD_PWR_N =
Check the oscillator clock waveforms.
19.2Mhz : OSC4000
Change UCP3000
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung's written authorization is strictly prohibited.
Initial Failure
Yes
Abnormal
1.8V(High)
Yes
Normal
Abnormal
Change PBA
END
No
Check the OSC4000
Abnormal
Check the output clock waveforms and frequency.
※ Test condition (Oscilloscope setting)
: 20.0us.div (time division)
8-13
Level 3 Repair
Check the U4000