7. Level 2 Repair
7-1. Disassembly and Assembly Instructions
7-1-1. Disassembly
Sequence of Disassembling
1
1) Detach the TAP and PEN.
* This sequence is only P35x.
3
1) Remove the Motor tape.
2) Disconnect the Motor connector.
* Don't use sharp tool.
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung's written authorization is strictly prohibited.
2
1) Disassemble JIG(GH81-11926A) insert between
REAR and FRONT(Middle of SET), detach the REAR.
* Be careful to damage of hook and FRONT
deposition.
4
1) Detach the coaxial cable.
* Don't use sharp tool.
7-1