Related Manuals for Bartec 07-3400 Series
Summary of Contents for Bartec 07-3400 Series
- Page 1 BARTEC Operational Instructions – Control and signal device actuators and accessories Control and signal device actuators and accessories Type 07-3400-****/**** Technical data subject to change without notice 1 / 8 01-3400-7D0001/REV-A-12-2022/ESS-461926...
- Page 2 BARTEC Operational Instructions – Control and signal device actuators and accessories Control and signal device actuators and accessories Type 07-3400-****/**** Explosion protection Notified Body Number 0044 Approved Body Number 2503 ATEX/UKEX II 2G Ex eb IIC Gb Ex protection type...
-
Page 3: Safety Instructions
BARTEC Operational Instructions – Control and signal device actuators and accessories Safety Instructions Transport, Storage The control and signal device actuators may be used only within NOTICE the specified service and operating temperature. Control and signal device actuators damage through Utilisation in areas other than those specified and the incorrect transport or incorrect storage. -
Page 4: Service Address
BARTEC Operational Instructions – Control and signal device actuators and accessories Disposal – To confirm with IEC 60947-5-5 & UL 60947-5-5 the E-stop twist and pull to release actuators 07-3400-R***/**** & 07-3400-N***/****, have to be used in combination with the... - Page 5 BARTEC Operational Instructions – Control and signal device actuators and accessories Mounting of the actuators shield holder Control and signal device actuator Enclosure with wall thickness of 1 to 6 mm (0.04 to 0.24 in) with a mounting hole 30.3 mm (1.2+0.01 in)
- Page 6 BARTEC Operational Instructions – Control and signal device actuators and accessories Mounting information Marking clip/Shield holder Locking device Protective collar Start of installation Optional: Attachment of the latch with ball chain. Thread Position of the ball chain through and the anti-twist...
- Page 7 BARTEC Operational Instructions – Control and signal device actuators and accessories Konformitätsbescheinigung Attestation of Conformity Attestation de conformité 01-3400-7C0001 Nous BARTEC GmbH Max-Eyth-Straße 16 97980 Bad Mergentheim Germany erklären in alleiniger declare under our sole attestons sous notre seule Verantwortung, dass das Produkt responsibility that the product responsabilité...
- Page 8 BARTEC Operational Instructions – Control and signal device actuators and accessories BARTEC BARTEC GmbH Max-Eyth-Str. 16 97980 Bad Mergentheim Germany Phone: +49 7931 597-0 info@bartec.com bartec.com Technical data subject to change without notice 8 / 8 01-3400-7D0001/REV-A-12-2022/ESS-461926...